EVALUTION OF SEMESTER 1

 A. Multiple Choice

1. D.
2. A.
3. D.
4. C.
5. A.
6. B
7. C
8. E
9. E
10. D
11. C
12. B
13. C
14. E
15. B
16. E
17. A
18. E
19. E
20. B
21. A
22. A
23. B
24. B
25. C
26. A
27. E
28. D
29. A
30. C

B.Essay
1. Explain the proper way to turn a computer On and Off !
* Turn On the computer :

a.Ensure that all power cable in a computer are connected
b.Turn On the CPU by pressing the ON or Power button on the casing
c.Turn On the monitor by pressing the On or Power button on the monitor
d.Wait until the booting procedure is finished, which is shown by the desktop appearance on the monitor screen.

* Shut Down on the computer :

a. Close all active application programs.
b. Click the Start button on the desktop menu.
c. Click the Shut Down button
d. Wait a moment until the computer is shutting down.

2. Name several categories of application software !

a.Word Processor (Office Suite)
b.Graphic Suite
c.Multimedia
d.Web Browser

3. Explain briefly about computer operation !

4. What is the abbreviation and the function of ROM !

ROM = Read Only Memory. ROM is to save computer operation program .

5. Name word processing software from Windows Vista operating system !

Those are Notepad and Wordpad

6. Name types of flash memory that you know !

CF, SD, MMC, Memory Stick and xD

7. Name three examples of computer network topology !

a. Bus Topology
b. Star Topology
c. Ring Topology

8. What are the ethics in using ICT device in the places of worship ?

To avoid ICT device and To switch into silent or vibrate mode

9. Name aspects to be aware of in using a cellphone ?

a. Use a handsfree device to reduce the electromagnetic wave. Even though it has not been clinically proven, electromagnetic wave can distrub brain cells and can cause cancer. Using cellphones for a long period of time can heat the ears.
b. Do not use the cellphone while driving. Besides it is against the rule, it distracts the driver's concentration. IF it is really necessary to use cellphone, use a handsfree device.
c. Do not use cellphone on a plane. The electromagnetic wave transmission distrubs the navigation system in the cabin that could cause a plane uncontrolled or lose direction
d. Do not use a cellphone in a gas station. The warning is because it can break the cellphones or the filling up digital devices in the gas station.

10. Describe the advantage of using genuine software !

a. Free application software updates
b. Official technician support
c. Upgrade discount
e. Software manual
f.Guaranteed free from virus and spyware

Evaluation Of Semester 1

A. Multiple Choice

1. E
2. A
3. D
4. C
5. A
6. B
7. C
8. E
9. D
10. D
11. D
12. A
13. C
14. D
15. A
16. D
17. D
18. D
19. B
20. A
21. D
22. C
23. C
24. B
25. A
26. A
27. E
28. A
29. A
30. C

Chapter 3.Turn In Using Information and Connection Technology(ICT)

A. Multiple Choice

1. A
2. E
3. D
4. A
5. E
6. A
7. A
8. C
9. A
10. C

B. Essay
1. Name several factors that make someone prefer using illegal software?
> Low income, Low education level, The cost of a permit or licensed software is relatively expensive, Low law enforcement, Lack of awareness to use genuine software.
2. Describe the difference between etchis and morality in the society?
> Ethics are a concept of acknowledgement by the society towards human thoughts, which means that this concept evolves following men's true values. Where as, morality is a code of conduct or a common conception of what is right according to the society.
3. What is meant by the patent rights of a product?
> Exclusive rights granted by the State to an Inventor of the Invention in the technology, which for a given period Invention implement their own or to give consent to another party to implement them.
4. Explain the correct position/posture to use a computer?
> The good sitting position is to sit on a seat with a back-rest, and the head is not so high in order to keep the linear distance with the monitor. The good viewing distance between a monitor and the eyes is around 46-47 cm.
5. What is the abbreviation of HAKI?
> Hak Cipta dan Hak Atas Kekayaan Intelektual

Chaptur3.Turn In Using Informasi and Communication Technology(ICT)

Chapter 3. Tem In Using ICT

A. Multiple Choice
1.A
2.E
3.E
4.A
5.E
6.A
7.A
8.C
9.A
10.C

B. ESSAY

Answer the following questions correctly.

1. Name several facotrs that make someone prefer using illegal softwares.
2. Describe the difference between ethics and morality in the sociaty.
3. What is meant by the patent rights of a product ?
4. Explaint the correct position / posture to use a computer .
5. What is the abreviation of HAKI?

ANSWER ! ! !

1. a. Low Income b. Low income b. Low education c. The cost a permit or licensed software is relatively expensive, d. Low law enforcement, e. Lack of awareness to use genuine software.
2. Ethics are a concept of ac knowlegment by the society towards human thoughts, which means that this cncept evolves following men's true values. Whereas, morality is a code of conduct or a common conception of what is right according to the society (common values).
3. Trademark with patent has rights by law, so that the invention cannot be used by people or other company without the permission of the patent owner.
4. The good sitting position is to sit on a seat with a back-rest, and the head is not so high in order to keep the linear ditance with the monitor.
5. Hak Atas Kekayaan Intelektual (HAKI) or Intellectual Property Rights Protection

Chapture 2 .Understanding Fungtion And Operating Of Various ICT Devices

A. Multiple Choice

1. A.

2. C.

3. B.

4. B.

5. E.

6. E.

7. C.

8. B.

9. A.

10.C.

B. Essay

(Answer the following question correctly)

1. In ASCII code, by what code is letter W represented ?

2. Name and explain all supporting devices inside a CPU ?

3. What is the abbreviation and the function of ROM ?

4. Name three examples of network interface cards.

5. Name and explain several cables that use on a wired network.

Answer...!!!

1. the latter W is respresented by the number code 87.

2.  - Control unit is to translate commands or intructions in a series and then continues theem to
        the entire computer parts.
    - Arithmetic Logic Unit (ALU) is to proces data by adding,subtracting,comparing,and using
       logical formal
    - Memory is to collect or to store data to run an application program.

3. ROM = Read Only Memory

    function : ROM is to save computer operation program, such as BIOS and booting.

4. ethernet, arcnet, and token ring.

5. a. Kabel UTP (Unishielded Twisted Pair)

      in consists of a pair of plastic wrapped conductor and each is colored. the frequency ranges from 100 Hz to 5 MHz. A UTP connector is required to install a UTP cable on network card, such as RJ 45 connector. The cost of UTP is relatively cheap.

    b. STP cable (Shielded Twishted Pair)

       STP  cable is similar with UTP cable, except that it has double wrap. The middle wrap is a metal shield or metal foil to avoid electromagnetic interference. Other than that STP cable connector and UTP cable connector are alike.

    c. coaxial Cable

coaxial cable consists of a main copper conductor with three wraps. the first and third are plastic wraps. the first and third conductor are isolator, while the second web in the middle is a conductor. the connectors are BNC ( Bayonet Network Connector ). T-connector, and 50 ohm terminator. the terminator acts as a signal buffer in order not to obstruct the original signal.

    d. optical fiber.

optical fiber is made of plastic or glass that acts as a medium for signal transmission in the form of light. connector for the optical fiber is an FO connector. optical fiber enable data transmission speed of Mbps-2 Gbps. moreover, the signal range is farther than any other cable types an as a wider bandwith. the optical fiber is fragile and therefore difficult to be moved and installed, needs an expensive maintenance, and the cost of the optcal fiber is relatively expensive.

Chapture 2 Understanding Fungsion And Of Various ICTdevices

A. Multiple Choice

1.a. Every input that is received by a computer
2.c. The computer processing result
3.b. User-input-CPU-outout-user
4.b. Base-2 number system
5.e. 0 and 1
6.e. 8
7.c. Speaker
8.b. Control unit
9.b. MAN
10.c. Ring topology

B.Essay

1.In ASCII code,by what code is letter W represented?
2.Name and explain all supporting devices inside a CPU.
3.What is the abbreviation and the function of ROM?
4.Name three examples of network interface cards.
5.Name several cables that use on a wired network.

ANSWER

1.Code 87
2. a. a CPU socket,which is where a microprocessor is placed
    b.a memory slot,which is where a computer memory is placed
    c.a chipset,whuch is a chip that regulates the interaction among devices
    d.an expansion slot,such as PCI,AGP,and PCI express
    e.a power connector to receive electrical input from the power supply unit(PSU) and then distributes the electricity to all connecting devices
3.ROM(Read Only Memory)
   ROm is to save computer operation program,such as BIOS and booting
4.Ethernet,arcnet,token ring
5.UTP cable,STP cable,Coaxial cable

Latihan Membuat File.GIF

Alhamdulillah,akhirnya kita bisa membuat file berekstensi.GIF.
Caranya :

1. Sekedar contoh kita akanmengcapture gambar di layar dekstop.
2. Tekan tombol Print Screen 1x saja yang ada di keyboard
3. Buka Program Paint yakni Start > All Programs > Accessories > Paint.
4. Silahkan pilih Edit > Paste > Save As.
5. Pada File Name : Misalnya diberi nama Capture Gambar Via Print Screen.
6. Save As type, pilihlah ekstensi.GIF.
7. Biar aman jangan langsung di save namun di drive kelas X - C.
8. Lalu browse folders, click tulisan Computer > X - C > New Folder > New Folder Name >
9. Lalu diberi nama sesuai keinginan anda yang mudah diingat > Open > Save.
10. Selanjutnya bisa di upload ke blogspot anda sesuai prosedurnya.
11. Agar file gambarnya mudah dan cepat di upload.

Chapter 1. Basic Operating System

tugas tik hal 25

Evaluation of chapter

1.       A. software

2.       C.to set computer software operations

3.       E. adobe photoshop

4.       E.waiting until the booting procedure finishes

5.       A.shut down

6.       C.choos  the delete buttom

7.       B.input device

8.       C.reset

9.       A.click start menu,select all programs,click Microsoft office,click Microsoft office 2007

10.   B.double-clicking excel shutcut

B.

1. How to on a computer properly?

2. What do you know about the Reset button?

3. Name several ways  to open an application in windows Vista.

4. what is office Suite?Mention examples of office Suite.

5.Name several examples of application system that is comlatable with Windows Vista operating system.

ANSWER!!!

1.       a. Ensure that all power cable in a computer are connected.

b. Turn on the CPU by pressing the On or Power button on the cassing.

c. Turn on the monitor by pressing the On or Power button on the monitor.

d. Wait until the booting procedure is finished, which is shown by the desktop appearance on the monitor screen.

        2. Reset button use if the computer chares or hangs or can not be shut down through the                standard procedure, use the “reset” button to restart the computer.

         3 .

a)      By using shortcuts on the desktop

b)      By using start menu

c)       By using the related document.

        4.    word processor (office suite)

                Word processor is software for documenting letters, books , reports, thesis, work papers, etc. for example , Microsoft office 2007, openoffice.org, and Abiword.

          5.    a. Word Processor

                 b. Graphi Suite

                 c. Web Browser

                 d. Multimedia